Equip your boat with Tracs Titan 450 SS Drum Winch and Anchor Rode 300/20 (sold separately) for tangle-free anchoring without slippage regardless of the size of your boat. Available: Trac Titan 450 SS Drum Winch Keeps the rode on the drum, eliminating the need to tie off when anchoring. Pair it with the 2,900-lb.-break-strength, rope-and-chain combination of the Trac Titan Anchor Rode 300/20 (sold separately). Super-fast free-fall speeds up to 500 fpm can only freespool when weight is pulling down, ensuring the spool stops rotating once your anchor hits the bottom so you dont end up with overrun, nesting or backlash. Power Up hauls in the line at up to 70 fpm, while Power Down lets it out at up to 80 fpm. Easy to install above or below deck and can be used with virtually any type of rope or chain. Permanent-magnet DC motor, 12-volt nominal, can be mounted at 30, 45 and 90 to fit your anchor-well configuration. Rugged 316 marine-grade stainless steel construction and sealed 8-gauge battery lead wires. Normal operation uses between 15 and 25 amps, while the current is limited to 60 amps. Includes two sealed-membrane switches with circuit reset, Power Up/Down and free-fall modes. Comes with 316 stainless steel hardware, installation instructions and mounting templates. Holding capacity: 4,000 lbs. Lifting capacity: 450 lbs. Max. working load: 175 lbs. Trac Titan Anchor Rode 300/20 Combines 300 ft. of 5/16 double-braided nylon anchor rope with 20 ft. of G43 galvanized marine chain for a break strength of 2,900 lbs. Compatible with drum winches and windlasses. Professionally spliced with stainless steel thimble and nylon whipping. Core-to-cover splice evenly distibutes load. The whip locks the splice in place, enusuring there is no slippage. < Type: Anchor Lifts and Winches.
